快三投注网

HXY-5A Spindle Core Drilling Rig

Home » Products » Drilling Rig » 快三投注网Core Drilling Rig » Spindle Drilling Rig » HXY-5A Spindle Core Drilling Rig

Description
This HXY-5A spindle type core drilling rig incorporates the advantages and characteristics of various core drilling rigs home and abroad. It is a kind of hydraulic-driven, spindle, diamond-bit, and small-diameter core drill rig with fairly powerful drilling force.
The HXY-5A core drilling rig is compact in structure, reasonable in layout, moderate in light. It is easy to assemble. It has a broad range of rotary speed. Equipped with water brake, the drilling rig enjoys high hoisting force. As a result, it is convenient in low-position lift.

Application
HXY-5A spindle type core drilling rig usually takes diamond bit or hard tungsten-carbide tipped bit. It is widely applied in the field of geology, metallurgy, coal mine, hydrological and engineering drilling. It is mainly suitable for exploration of metal or non-metal solid mineral ore bed. It can also be used in the exploration of superficial-zone petroleum and natural gas, mines' ventilation and water discharge tunnel drilling as well as large-diameter foundation piling.

Main Technical Specifications
1. Drilling Capacity (Core Drilling):

Sorts of Drill Rod Drill Rod Spec. Drilling Depth
Home made Planer in and out Φ43×6mm(Φ1.69×0.24 inch) 1,800 m (5904 feet)
Φ54×6mm (Φ2.13×0.24 inch) 1,300 m (4264 feet)
Φ67×6mm (Φ2.64×0.24 inch) 1,100 m (3608 feet)
Thickened inner Φ50×5.5mm (Φ1.97×0.22 inch) 1,500 m (4920 feet)
Drill Rod Φ60×6 mm (Φ2.36×0.24 inch) 1,200 m (3936 feet)
Extracting core with wire line Φ55.5×4.75 mm (Φ2.19×0.19 inch) 1,600 m (5248 feet)
Φ71×5 mm (Φ2.80×0.20 inch) 1,300 m (4264 feet)
Φ89×5 mm (Φ3.50×0.20 inch) 1,000 m (3280 feet)
DCDMA (Diamond Core Drill
Manufacturer Association) made Drill Rod
Thickened inner BW 1,500 m (4920 feet)
NW 1,200 m (3936 feet)
HW 900 m (2952 feet)
Extracting core with wire line BQ 1,800 m (5904 feet)
NQ 1,300 m (4264 feet)
HQ 1,000 m (3280 feet)

2. Drilling Angle: 0°~360°(90°~75°, when drilling with a drilling tower)
3. Power Unit:
(1)Electrical Motor Y250M-4 55 kw(73.8HP) 1,480 rpm
(2)Diesel Engine Deutz F6L913 97 kw(130HP) 1,600 rpm
4. Rotator:
Type: dual-cylinder hydraulic feeding mechanical rotating
I.D. of Spindle: Φ93mm (3.66 inches)
Rotating Speed of Spindle (rpm):
Positive: Low Speed 95,166,249,359
High Speed 330, 575, 865, 1246
Negative: 55191
Max. Torque of Spindle: 5,500 N·m (4053.5 lbf·ft)
Stroke of Spindle: 500 mm (19.69 inch)
Max. Lifting Capacity of Spindle: 135 KN (30348 lbf)
Max. Pressuring Force of Spindle: 100 KN (22480 lbf)
5. Hoister:
Type: Planetary gearing transmission
Steel Wire Cable Dia: 18.5 mm (0.73 inch)
Drum Capacity for Cable: 120 m (394 feet) (Φ18.5 mm equivalent to 0.73 inch steel wire rope)
Max. Lifting Force (single line): 60 KN (13488 lbf)
Lifting Speed of the Wire Cable: (Power Eng. Speed at 1,500 rpm)
0.77;1.35;2.03;2.93 m/s (2.53;4.43;6.66;9.61 feet/s)
6. Clutch:
Type: Dry Double Chips Friction Clutch (normally closed)
7. Gearbox:
Type: Sliding Gear Gearbox (4 positive speeds and 1 negative speed)
8. Hydraulic System:
(1)System Pressure:
Working Pressure: 8 Mpa (1160 psi)
Max. Pressure: 12 Mpa (1740 psi)
(2)Oil Pump:
Type: Double Gear Pump
Displacement: 32+12 L/min (8.5+3.2 US Gallons/min)
Working Pressure: 20 Mpa (2901 psi)
Max. Pressure: 25 Mpa (3626 psi)
9. Water Brake:
Working Speed: 700 ~ 800 rpm
Single Rope Compensational Speed: 3~8 m/s (9.8~26.2 feet/s)
Single Rope Compensational Load: 45 KN (10116 lbf)
10. Drill Frame:
Type: Sliding Skids (with sliding base)
Backward Stroke: 600 mm (23.62 inch)
Dimensions (L×W×H): 3360×1300×2045 mm (132.3×51.2×80.5 inch) (with diesel engine)
3260×1300×2045 mm(128.3×51.2×80.5 inch) (with electromotor)
11. Weight of the Rig (without power unit): 3,100 kg (6836 lb)
12. Weight of the biggest dismountable section: 450 kg (992 lb)

Related Products
  • HXY-6A Spindle Type Core Drilling RigThe HXY-6A spindle type core drilling rig is driven by hydraulic pressure with powerful drilling force. It can perform diamond-bit small-diameter core drill. It has a compact structure, a rational layout and a moderate weight. It has large range of rotary speed and strong hoisting force. It is equipped with water brake and thus is easy to lift in low position. It is easy to assemble ...
状元彩票开户 快三投注网 天津11选5 快三网上投注 快三网上投注 状元彩票开户 快三投注网 快三网上购买 万发彩票注册 恒彩彩票开奖